- Working Time: 1min 30sec
- Compressive Strength: 50MPa minimum
- Lactic Acid Erosion: 0.17mm / hr maximum
- Film Thickness: 25μm maximum
- Cement Type: Radiopaque Glass Ionomer Luting Cement
- Particle Size: Less than 5 microns
- Strength: Exceptional (Compressive Strength: 128 MPa)
- Film Thickness: Very low
- Radiopacity: Good
- Wear and Erosion Resistance: High
- Mixing Time: Easy mixing, reducing surgery time
- Biocompatibility: Excellent, minimal pulp reaction
Medicept Dental Xtralute Glass Ionomer Luting Cement – Small
- 1 X 15gm Powder
- 1 X 10ml Liquid
Medicept Dental Xtralute Glass Ionomer Luting Cement – Large
- 1 X 35gm Powder
- 1 X Liquid 20ml
Mix the powder and liquid to the correct ratio.
- Dispense the recommended amounts of powder and liquid.
- Mix briskly until smooth and homogenous.
Apply the mixed cement to both restoration and prepared tooth.
- Ensure even coverage on both surfaces.
Seat the restoration within 30 seconds of completing the mix.
- Act swiftly to achieve proper adhesion.
- Apply firm and consistent pressure during seating.
Remove excess cement during the gel stage.
- Check for extruded cement around margins.
- Use dental instrument or floss to remove carefully.
After the final set, moisture-proof the margin by applying a final coat.
- Apply varnish or sealant for enhanced marginal seal.
- Country Of Origin: United Kingdom
- Manufacturer: Medicept
- Exceptional strength – Long lasting cementations
- Good radiopacity – Shows clearly under x-ray
- High level of sustained fluoride release – Prevention of secondary caries
- High wear and erosion resistance – Durable Cementations
- Easy mixing – To reduce surgery time
- Excellent biocompatibility – Minimal puplal reaction
Additional Information
| Medicept XtraLute GIC | Medicept Dental Xtralute Glass Ionomer Luting Cement – Small, Medicept Dental Xtralute Glass Ionomer Luting Cement – Large |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.